Omnibind Tanking Kit

Omnibind Tanking Tape

Omnicol Eflex R Adhesive

• Waterproofing kit for an elastic and watertight coating.

• Ideal for damp areas and areas exposed to water.

• Enough for a standard shower area.

• COAT Omnibind : permanently flexible waterproof coating.

• MB Omnibind : roll of reinforcement mesh tanking tape.

• Pasting brush for application.

MB Omnibind Reinforced mesh for joints & corners, construction joints and joint reinforcements at the base of the wall.

Place in a layer of COAT Omnibind, in order to bridge cracks.

Insensitive to moisture, does not rot.

Available in 100 and 12 metre rolls.

• Rapid setting flexible white S1 grade powdered tile adhesive.

• Suitable for all tile types & Natural stone & Large formats.

• Ideal if you need a slightly thicker bed of adhesive.

• Layer thickness: up to 20 mm.

• Ideal for interior and exterior applications.

• Classified in compliance with EN 12004: C2TE S1.

Omnicol PL35R Adhesive

Omnicol PL50R Adhesive

• Rapid setting flexible white C2 grade powdered tile adhesive.

• Suitable for Porcelain & Ceramic tiles on both walls and floors.

• Ideal for interior applications.

• Classified in accordance with EN 12004: C2 Grade

Suitability: Wall & Floor

Coverage: 6-8 Mtrs Squared

Colour: White

Flexibility: C2

• Rapid setting flexible white S1 grade powdered tile adhesive.

• Suitable for Porcelain & Ceramic tiles on both walls and floors.

• Ideal for interior and exterior applications.

• Classified in accordance with EN 12004: S1 Grade

Suitability: Wall & Floor

Coverage: 6-8 Mtrs Squared

Colour: White

Flexibility: S1 High

Omnicol PL79 Adhesive

• Standard setting flexible white S1 grade powdered tile adhesive.

• Ideal for all tile sizes including large formats.

• Suitable for Porcelain & Ceramic tiles on both walls and floors.

• Ideal for interior and exterior applications.

• Classified in accordance with EN 12004: S1 Grade

Suitability: Wall & Floor

Coverage: 6-8 Mtrs Squared

Colour: White

Flexibility: S1 High

Omnicol Silicone

• Neutral, acid-free and mould-resistant silicone mastic.

• Resistant to moisture, heat, UV rays and cleaning products.

• Seals joints and seams in sanitary facilities and wet rooms.

• Excellent adhesion in plastic baths and showers.

Omnicol WD Flex R Grout

• Premium fast curing water resistant flexible tile grout.

• Suitable for Porcelain & Ceramic tiles.

• Prevents discoloration.

• Ideal for interior and exterior applications.

• Wall and Floor.

• Indoor and outdoor.

• For Joints up to 10mm

• Increased chemical resistance and urine-resistant.

• Suitable for wet rooms & swimming pools DIN 18195-5.

• High abrasion-resistance and high-pressure resistant up to 100 bar.

• Classification in accordance with EN-13888: CG2W A.

Suitability: Wall & Floor

Coverage: 10 – 15 Mtrs Squared

Colour: 24 Colours Available

Flexibility: High

Size: 5kg

• Prevents cracking in the tiled surface, even if up to 2 mm wide cracks appear in the surface.

• For floors subject to thermal fluctuations, fresh concrete, cement screeds or underfloor heating.

• Only a thin 0.87 mm layer is required.

• For use indoor or outdoors, in dry or damp places.

SC Omnimat De-coupling Membrane

TP Universal Primer 3 Ltr

• Adhesion-enhancing primer.

• Pre-treatment of surface for tiling and plastering.

• Universally applicable on a large variety of surfaces.

• Sprayable deep primer, light green in colour.

• For indoor and outdoor use.

WD Omnimat waterproof de-coupling membrane

• Flexible, waterproof mat & decoupling membrane for laying under tiles.

• Very good chemical resistance.

• Suitable for surfaces that are sensitive to moisture, such as wood, plasterboard and plaster coatings.

• Only a very thin 0.4 mm layer is required.

• Can be used on walls and floors.

• Suitable for interior and exterior use under certain conditions.-enhancing primer.

• Pre-treatment of surface for tiling and plastering.

• Universally applicable on a large variety of surfaces.

• Sprayable deep primer, light green in colour.

• For indoor and outdoor use.

ZR Omnibind Grip Primer

• Light green, fast-drying sand / aggregate primer

• To be used on smooth and closed surfaces.

• For application under tiling.

• Roller or brush.

• Gives smooth surface’s grip for enhanced adhesion

SC500 Levelling Compound

• Tiling possible after 12 hours

• Layer thickness up to 50 mm.

• True Self-levelling.

• Suitable for machine pumping.

• Suitable when there are major irregularities in the substrate, such as grooves and holes.